Simcenter CFD and FSI simulations help maximize the operational efficiency of chemical reactors.
Maximizing throughput and capacity—these are always amongst the goals of chemical reactor design & analysis engineers, to minimize total operational cost. Multiphysics 3-D Computational Fluid Dynamics (CFD) simulations can improve the reactor design and optimize operations by modeling all relevant phenomena, including fluid flow in complex geometries, heat transfer, hydrodynamic agitation, fluid-structure interaction (FSI), and more. 
In this webinar, Nicolas Perret (Senior CFD Modeling Engineer at Solvay) will present the process by which Solvay was able to leverage the flexibility, customizability and robustness of Simcenter STAR-CCM+ to  improve the thermal performance of a chemical reactor while simultaneously addressing mechanical design constraints, resulting in improvements to overall throughput & capacity. 
Simulations performed with a calibrated in-house 2-phase condensation model enabled the evaluation of the performance of condensing thermal fluid heating coils. These simulations provided the insight that guided the redesign of heating coil systems with improved thermal performance, leading to a significant decrease in batch duration. 
In addition, design modifications to the agitator were validated using the FSI capabilities in Simcenter STAR-CCM+. The coupling of hydrodynamic prediction and mechanical resistance calculations enabled the Solvay engineers to validate the increased reactor capacity. 
The webinar will also provide an overview of the key requirements of reactor modeling and the capabilities in Simcenter STAR-CCM+ that address them.
- Dr. Ravi Aglave, Director, Energy & Process Industries at Siemens Digital Industries Software
- Nicolas Perret, Senior CFD Modeling Engineer, Solvay


13:00 - 14:00 hs GMT+1


Enviar a un amigo
Mi email *
Email destinatario *
Comentario *
Repite estos números *
Control de seguridad
Mayo / 2020 1113 webinars
Lun 27 de Mayo de 2020
Mar 28 de Mayo de 2020
Mié 29 de Mayo de 2020
Jue 30 de Mayo de 2020
Vie 01 de Mayo de 2020
Sáb 02 de Mayo de 2020
Dom 03 de Mayo de 2020
Lun 04 de Mayo de 2020
Mar 05 de Mayo de 2020
Mié 06 de Mayo de 2020
Jue 07 de Mayo de 2020
Vie 08 de Mayo de 2020
Sáb 09 de Mayo de 2020
Dom 10 de Mayo de 2020
Lun 11 de Mayo de 2020
Mar 12 de Mayo de 2020
Mié 13 de Mayo de 2020
Jue 14 de Mayo de 2020